1. Determine the smooth placement of the device: First, select a flat and solid site for the device to be carried, and add a load-bearing balance base to stabilize the device and prevent tilt and collision.

2. Determine the performance of the lifting equipment: if the equipment handling volume is large, you need to use a good performance of the lifting equipment, pay attention to the performance and quality of the wire rope and lifting equipment, to ensure that the lifting equipment can pull the equipment

3. Clarify the carrying capacity of the transport channel: Before the equipment is relocated, the upper gap of the bridge and culvert on the driving route should be found out and the carrying capacity of the road and bridge. When crossing the bridge, slow down in low gear and do not allow turning or braking on the bridge deck. If the bearing capacity of the bridge is not enough, reinforcement measures must be taken in advance

4. Protect the vulnerable area of the equipment: If the moving equipment is a precision instrument, you must first know what the vulnerable part of the instrument is, and you must be especially careful. Air cushion film, blanket and other shock absorption measures are generally used, and care should be taken when using lifting equipment

5. Determine the safe transportation of the equipment: First of all, according to the shape of the equipment, if it is reasonable, it can be directly loaded and transported, but if the shape of the equipment is special, it should be flexible and the focus should be fixed. In addition, the moving vehicle should choose an experienced driver, because the quality of the equipment itself is high, as long as the experienced driver can ensure smooth driving.